cw600S + dish 1000

[ws18st]

Will a cw600 work with a dish 1000? I just picked up a 1000 from the garbage and I can't seem to get it to work. The LNBs have 3 outputs and one input, is each output for the different sats (110, 119, 129)? Do I need a switch to combine these outputs or are those just hook to up 3 receivers?
I've tried messing around with changing he frequencies from 11250 to 10600, I get a signal but zero on the pic.

[builderman]

A friend of mine has a setup like that with the 1000 and a cws 700 and it seemd to work ok ur gona need to do a lotta of tweaking but u shoud get it to work

[ws18st]

Thanks..I just read on another site that I would have to drop the elevation a bit and move it west very slowly. The thing I had a question on was the freq for the 129. The 110 and 119 are at 11250 and was wondering if the 129 was the same?

[jasonk270]

your lnb frequency for 129w should be 11250 just like 119w and 110w the tp frequency should be set to 12224 however unless your searching for hd channels 129w holds only local channels a perfect scan should get you about 68 local channels. if you cant get 129w by dropping the elevation try skewing the dish slightly. its hard to give you an exact answer different locations require different dish settings.

[ws18st]

Will anyone be kind enough to help me out with the elevation, skew and azimuth for the dish 1000 in San Antonio, Tx. (zip 78245)? Thaks.....

[rick_d]

Magn. Azimuth: 211.31
Skew Angle: 110.5
Dish Elevation: 47.95
USA - TX - San Antonio

[ted3434]

i think the singal is just power to the lnbs
dont forget to use ocs-dp and your diseqc as lnb1 lnb2 lnb3 to give you a better understaning of that something like this
119
tranponder 12239
LNB freq 11250
LNB type ocs-dp
22kzh off
Diseqc lnb1
legacy sw off
motor off

110
tranponder 12224
LNB freq 11250
LNB type ocs-dp
22kzh off
Diseqc lnb2
legacy sw off
motor off
and i think 129
would be
tranponder 12224 not sure about tps on 129
LNB freq 11250
LNB type ocs-dp
22kzh off
Diseqc lnb3
legacy sw off
motor off

[ws18st]

I appreciate all the info given..Will check it out later..